Ixabiso Eliphantsi laseTshayina kubavelisi kunye nabathumeli beLaminate Sheet (G11) baseTshayina

Ixabiso Eliphantsi kakhulu le-China Electrical Insulation Green Epoxy Glass Fabric Laminate Sheet (G11)

inkcazo emfutshane:

Iphepha le-EPGC series Epoxy Glass Cloth Rigid Laminated Sheet liqulathe ilaphu leglasi elilukiweyo elifakwe i-epoxy thermoseting resin, elifakwe i-laminated phantsi kobushushu obuphezulu kunye noxinzelelo oluphezulu. Ilaphu leglasi elilukiweyo alifanele libe ne-alkali kwaye liphathwe yi-silane coupler. Amaphepha e-EPGC serial aquka i-EPGC201 (NMEMA G10), i-EPGC202 (NEMA FR4), i-EPGC203 (NEMA G11), i-EPGC204 (NEMA FR5), i-EPGC306 kunye ne-EPGC308.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Besikulungele ukwabelana ngolwazi lwethu malunga nentengiso kwihlabathi liphela kwaye sikucebise iimveliso ezifanelekileyo ngexabiso eliphezulu. Ngoko ke iProfi Tools ikunika ixabiso elifanelekileyo lemali kwaye besikulungele ukudala kunye ngexabiso eliphantsi kakhulu le-Electrical Insulation Green Epoxy Glass Fabric Laminate Sheet (G11), ingcinga yethu yokuxhasa kukunyaniseka, ubundlobongela, ukuba yinyani kunye nokuvelisa izinto ezintsha. Ngoncedo, siya kuphucuka ngcono kakhulu.
Besikulungele ukwabelana ngolwazi lwethu lokuthengisa kwihlabathi liphela kwaye sikucebise ngeemveliso ezifanelekileyo ngexabiso eliphantsi. Ngoko ke iProfi Tools ikunika ixabiso elifanelekileyo lemali kwaye besikulungele ukudala omnye nomnye.Iphepha le-G11 laseTshayina, Iphepha leFiberglass, Ngenjongo "yokungabi nasiphako". Ukunyamekela okusingqongileyo, kunye nembuyekezo yoluntu, ukhathalelo lwabasebenzi kuluntu njengomsebenzi wabo. Samkela abahlobo abavela kwihlabathi liphela ukuba basityelele baze basikhokele ukuze sikwazi ukufezekisa injongo yokuphumelela kunye.

Iishiti ze-EPGC (udidi lobushushu: B～H), zenziwe ngokwe-IEC60893-3-2. Ezi shiti zinamandla abalaseleyo oomatshini (izinga lokugcina amandla obushushu linokufikelela ngaphezulu kwe-50%) phantsi kobushushu obuphakathi okanye imeko yobushushu, kunye nepropathi yombane ezinzileyo (ukumelana nobushushu emva kokuntywiliselwa kufikelela kwi-1012Ω) kwimeko yokufuma okuphezulu. Kwaye kunye nokunyamezela okuphezulu kwe-voltage / ukumelana ne-voltage (ngaphezulu kwe-35kV), kuhambelana ne-lamination. I-EPGC202, i-EPGC204 kunye ne-EPGC306 nazo zinomgangatho obalaseleyo wokurhoxisa ilangatye. Iishiti zikwaphumelele ukufunyanwa kwezinto ezinobuthi nezinobungozi (nge-RoHS Report).

Isetyenziswa njengezixhobo zokwambathisa ubushushu kwiimoto zombane zeClass BH, izixhobo zombane, ezineemfuno zokumelana nomlilo okanye ezingazifuniyo, okanye ezinye izinto ezisetyenziswayo.

Ubukhulu obufumanekayo:0.30mm ~ 200mm

Ubungakanani bephepha obufumanekayo:
1500mm*3000mm、1220mm*3000mm、1020mm*3000mm、1020mm*2440mm、1220mm*2440mm、1500mm*2440mm、1000mm*2000mm、1200mm*2000mm kunye nezinye iisayizi ezixoxiswanayo.

WPS图片-修改尺寸(LJK)
I-SMC-4(1)

Uhlu kunye nohlobo lweePhepha ze-Epgc

Thayipha igama				Usetyenziso kunye nesici	Iklasi yobushushu
I-D&F	I-GB/IEC	I-NEMA	abanye	Usetyenziso kunye nesici	Iklasi yobushushu
DF201	I-EPGC201	G10	I-Hgw 2372	Kwezoomatshini, izixhobo zombane kunye nee-elektroni. Ngamandla aphezulu phantsi kobushushu obuphakathi, ukumelana okuhle kakhulu kwe-arc kunye ne-PTI ephezulu kunye ne-CTI	B 130℃
DF202	I-EPGC202	FR-4	I-Hgw 2372.1,F881	Kufana ne-EPGC201, ephethe i-flame retardant ekhankanyiweyo.	B 130℃
DF202A	—	—	—	Ifana ne-DF202, kodwa inamandla aphezulu oomatshini.	B 130℃
DF203	I-EPGC203	G11	Hgw2372.4	Kwizixhobo zoomatshini, zombane kunye nee-elektroni. Ngamandla aphezulu phantsi kobushushu obuphakathi	F 155℃
DF204	I-EPGC204	FR-5	I-Hgw 2372.2	Ifana ne-DF203, ephethe i-flame retardant echaziweyo.	F 155℃
DF306	I-EPGC306	—	DF336	Ifana ne-DF203, inokumelana okuhle kakhulu nelangatye, ukumelana ne-arc kunye ne-PTI ephezulu.	F 155℃
DF306A	—	—	—	Ifana ne-DF306, kodwa inamandla aphezulu oomatshini.	F 155℃
DF308	EPGC308	—	—	Ifana ne-DF203, kodwa inokuzinza okungcono kobushushu.	Ubushushu obuphantsi 180℃

Iimfuno zobugcisa

Inkangeleko
Umphezulu weshiti kufuneka ube tyaba kwaye ugudile, ungabi namaqamza omoya, imibimbi okanye amaqhekeza kwaye ungabi nezinye iziphene ezincinci ezifana nemikrwelo, ukuqhekeka, njl. Umphetho weshiti kufuneka ucoceke kwaye ungabi naqhekeko kunye namaqhekeza. Umbala kufuneka ufane kakhulu, kodwa amabala ambalwa avumelekile.

Ubukhulu obuqhelekileyo kunye nokunyamezelanaIyunithi: mm

Ubukhulu obuqhelekileyo

Ukuphambuka

Ubukhulu beNiminal

Ukuphambuka

0.5,0.6

0.8,1.0

1.2

1.5

2.0

2.5

3.0

4.0

5.0

6.0

8.0

+/-0.15

+/-0.18

+/-0.21

+/-0.25

+/-0.30

+/-0.33

+/-0.37

+/-0.45

+/-0.52

+/-0.60

+/-0.72

+/-0.82

+/-0.94

+/-1.02

+/-1.12

+/-1.30

+/-1.50

+/-1.70

+/-1.85

+/-2.10

+/-2.45

+/-2.60

+/-2.80

Amagqabaza: Kwiphepha lobukhulu obungengobom obungadweliswanga kule Theyibhile, ukuphambuka okuvunyelweyo kuya kufana nokobukhulu obukhulu obulandelayo

Ukujika kwePhepha kwiSheetsIyunithi: mm

Ubukhulu

Ukuphambuka kokugoba

3.0～6.0

＞6.0～8.0

＞8.0

≤10

≤8

≤6

Ukucubungula ngoomatshini:
Amaphepha afanele angabi nazimfanta kunye neziqwenga xa kusetyenziswa iindlela zokugaya ezifana nokusarha, ukubhola, ukutshiza kunye nokugaya.

Iipropati zePhysical, Mechanical kunye neDielectric

Hayi.	Iipropati		Iyunithi	I-EPGC201		I-EPGC202		I-EPGC203
Hayi.	Iipropati		Iyunithi	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo
1	Ukufunxwa kwamanzi (iphepha le-2mm)		mg	≤20	8	≤20	9	≤20	9
2	Amandla aguquguqukayo	Kwimeko eqhelekileyo	I-MPa	≥340	460	≥340	500	≥340	450
2	(Ubude)	155℃+/-2℃	I-MPa	—	—	—	—	≥170	240
3	Amandla empembelelo, ahambelana ne-laminations (i-Charpy, i-notch)		kJ/m2	≥33	53	≥33	51	≥33	50
4	Amandla ombane, ajonge ngqo kwii-laminations (kwioyile ye-transformer kwi-90℃+/-2℃)		kV/mm	≥11.8	17	≥11.8	17	≥11.8	18
5	Amandla ombane, ahambelana ne-laminations (kwioyile ye-transformer kwi-90℃+/-2℃)		kV	≥35	48	≥35	45	≥35	45
6	I-Dielectric dissipation factor (1MHz)		—	≤0.04	0.02	≤0.04	0.02	≤0.04	0.021
7	I-Dielectric constant (1MHz)		—	≤5.5	4.8	≤5.5	4.7	≤5.5	4.7
8	Ukumelana ne-arc		s	—	—	—	182	—	182
9	Ukumelana nokulandelela ubungqina (i-PTI）		V	—	—	—	600	—	600
10	Ukumelana nobushushu emva kokuntywiliselwa emanzini		I-MΩ	≥5.0×104	2.1 x107	≥5.0×104	1.5 x106	≥5.0×104	1.1 x107
11	Ukutsha		Ibanga	—	—	V-0	V-0	—	—
12	Isalathisi sobushushu (TI)		—	≥130		≥130		≥155
Hayi.	Iipropati		Iyunithi	I-EPGC204		I-EPGC306		EPGC308
Hayi.	Iipropati		Iyunithi	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo	Ixabiso eliqhelekileyo
1	Ukufunxwa kwamanzi (2mm)		mg	≤20	11	≤20	8	≤20	9
2	Amandla aguquguqukayo	Kwimeko eqhelekileyo	I-MPa	≥340	480	≥340	460	≥340	500
2	(uLengwise)	155℃+/-2℃	I-MPa	≥170	260	≥170	280	—	270
3	Amandla empembelelo, ahambelana ne-laminations (i-Charpy, i-notch)		kJ/m2	≥33	51	≥33	53	≥33	52
4	Amandla ombane, ajonge ngqo kwii-laminations (kwioyile ye-transformer kwi-90℃+/-2℃)		kV/mm	≥11.8	16	≥11.8	17	≥11.8	18
5	Amandla ombane, ahambelana ne-laminations (kwioyile ye-transformer kwi-90℃+/-2℃)		kV	≥35	45	≥35	48	≥35	45
6	I-Dielectric dissipation factor (1MHz)		—	≤0.04	0.018	≤0.04	0.02	≤0.04	0.02
7	I-Dielectric constant (1MHz)		—	≤5.5	4.7	≤5.5	4.8	≤5.5	4.7
8	Ukumelana ne-arc		s	—	—	—	182	—	—
9	Ukumelana nokulandelela ubungqina (i-PTI）		V	—	—	—	600	—	—
10	Ukumelana nobushushu emva kokuntywiliselwa emanzini		I-MΩ	≥5.0×104	3.8 x106	≥5.0×104	1.8 x107	≥5.0×104	7.1 x106
11	Ukutsha		Ibanga	V-0	V-0	V-0	V-0	—	—
12	Isalathisi sobushushu (TI)		—	≥155		≥155		≥180

Ukupakisha kunye nokugcina

La mashiti makagcinwe kwindawo apho ubushushu bungekho ngaphezulu kwama-40℃, aze abekwe ngokuthe tye kwipleyiti yombhede enobude obuyi-50mm nangaphezulu. Gcina kude nomlilo, ubushushu (isixhobo sokufudumeza) kunye nelanga elithe ngqo. Ixesha lokugcina la mashiti ziinyanga ezili-18 ukususela kumhla wokuphuma kwifektri. Ukuba ixesha lokugcina lingaphezulu kweenyanga ezili-18, imveliso ingasetyenziswa emva kokuvavanywa ukuba ifanelekile na.

Amagqabaza kunye namanyathelo okhuseleko xa ufaka isicelo

1 Umatshini wokwenza isinyithi kufuneka uhambisane ne-JB/Z141-1979,Iindlela zoomatshini bokugquma iimveliso ezifakwe i-laminate, kuba la mashiti anomahluko angaphakathi kwisinyithi.

2 Kufuneka kusetyenziswe isantya esiphezulu kunye nobunzulu obuncinci bokusika xa kusenziwa imashini ngenxa yokuguquguquka kobushushu obuphantsi kwamaphepha.

3 Ukuyisika le mveliso ngomatshini kuya kukhupha uthuli nomsi omninzi. Kufuneka kuthathwe amanyathelo afanelekileyo ukuqinisekisa ukuba amanqanaba othuli akwimida eyamkelekileyo ngexesha lokusebenza. Kucetyiswa ukuba kubekho umoya ophumayo kwindawo ethile kunye nokusebenzisa iimaski zothuli/amasuntswana ezifanelekileyo.

4 Amashiti ayafunxwa kukufuma emva kokuba enziwe ngomatshini, kucetyiswa ukuba agqunywe nge-insulating vanish.

Iindawo zoomatshini be-Epoxy(1)
iindawo zoomatshini(1)(1)

Izixhobo zeMveliso

3240 (7)
3240 (8)
3240 (9)
3240 (10)

Iphakheji yeePhepha zeEPGC

3240 (12)
3240 (11)
Besikulungele ukwabelana ngolwazi lwethu malunga nentengiso kwihlabathi liphela kwaye sikucebise iimveliso ezifanelekileyo ngexabiso eliphezulu. Ngoko ke iProfi Tools ikunika ixabiso elifanelekileyo lemali kwaye besikulungele ukudala kunye ngexabiso eliphantsi kakhulu le-Electrical Insulation Green Epoxy Glass Fabric Laminate Sheet (G11), ingcinga yethu yokuxhasa kukunyaniseka, ubundlobongela, ukuba yinyani kunye nokuvelisa izinto ezintsha. Ngoncedo, siya kuphucuka ngcono kakhulu.
Ixabiso eliphantsi kakhuluIphepha le-G11 laseTshayina, Iphepha leFiberglass, Ngenjongo "yokungabi nasiphako". Ukunyamekela okusingqongileyo, kunye nembuyekezo yoluntu, ukhathalelo lwabasebenzi kuluntu njengomsebenzi wabo. Samkela abahlobo abavela kwihlabathi liphela ukuba basityelele baze basikhokele ukuze sikwazi ukufezekisa injongo yokuphumelela kunye.